Servo Driving 380V / 50Hz 16KW Fully Automatic Sanitary Napkin Making Machine
Servo Driving 380V / 50Hz 16KW Fully Automatic Sanitary Napkin Making Machine
Packing machine Function & Characteristic:
1. Efficient: Bag - making, filling, sealing, cutting, heating, date / lot number achieved in one time;
2. Intelligent: Packing speed and bag length can be set through the screen without part changes;
3. Profession: Independent temperature controller with heat balance enables different packing materials;
4. Characteristic: Automatic stop function, with safe operation and saving the film;
5. Convenient: Low loss, labor saving, easy for operation and maintenance.
Bag Type | Making Bag On Line |
Packaging | Wooden Cases |
Servo Driving | Mitsubishi Or Yaskawa Controlling PLC |
Yield | About 98% |
Working Efficiency | About 90% |
Packing Speed | Stable At 60 Bags For Each Minute |
packaging method | prefabricated bags, bottom gusset bags and side gusset bags |
packaging film | OPP film, complex film, single layer thickness≤70μm |
packaging dimension | inserted pads, stickered pads, stacking height≤150mm |
Installation power | About 16KW |
Three size dimension | L6.3m×W1.5m×H2.0m |
Power requirement | Three phase four wires (A,B,C,PE),380V/50Hz |
Features:
- Noiseless and maintenance free
- Excellent performance
- Sturdy construction
The sanitary pad packing machine with full servo motors is highly accurate and can run at the speed of 60 bags/min. With this speed, the final product is beautiful and the package has neat sealing edges. Besides, there is an online making bag function in the rear of the machine, directly to make PE film form bags.
The electrical system device in accordance with the relevant provisions of GB/T5226.1-2002.
Achieve seal, angle, cutting function, the perfect seal, responsible, and the seal line and the center line of the packing bag have been to vertical.
Chemical nickel-plating was performed on all parts of the surface, contact with the products stainless steel materials using SUS304, and harmless to human body.
Angle overlap: angle overlap error ≤3mm (the two layer after sealing angle deviation ≤3mm)
By adjusting the current control seal temperature of the heating wire, the regulator and ammeter installed in the control panel, have the enough range to adjust the current of heating wire, the adjustable range: 0~30A, to ensure the stable and reliable sealing.
The row chain structure is driven by the separate servo, complete the prefabricated convey, and equipped with 5 positions for bag put in, one use and other backup.
The bagging operation is stable, accurate and reliable, to ensure that the bag is intact.
The bag-opening device control by the servo that avoid the instability of the curve of the track, and provide convenience for the products in changing.