Hight Speed Panty Liner Packaging Machine L6.3mÃ—W1.5mÃ—H2.0m Three Size Dimension
|After Sales:||Engineer Over Sea Service||Installation Power:||About 16KW|
|Servo Driving:||Full Servo||Yield:||â‰¥98%|
|Working Efficiency:||â‰¥90%||Packing Speed:||Stable At 60 Bags For Each Minute|
|packaging method||prefabricated bags, bottom gusset bags and side gusset bags|
|packaging film||OPP film, complex film, single layer thickness≤70μm|
|packaging dimension||inserted pads, stickered pads, stacking height≤150mm|
|Three size dimension||L6.3m×W1.5m×H2.0m|
|Installation power||About 16KW|
|Power requirement||Three phase four wires (A,B,C,PE),380V/50Hz|
The electrical system device in accordance with the relevant provisions of GB/T5226.1-2002.
The protective device is made of aluminum alloy bracket and a transparent organic glass plate, the thickness of the glass plate should be over 7mm.
Safety protection device in accordance with the relevant provisions of GB5083-1999.
The equipment manual specified safety precautions, in the dangerous device, the equipment of power transmission and air movement mechanism are labeled with obvious warning signs.
The emergency stop is safe and no damage to the equipment.
The full servo driving
By adapting Mitsubishi and Yaskawa motion controlling PLC and general linear servo driving system,it ensured a highly accurate package and stability.
Patented angle line structure
It has been highly proved as the most accurate and stable angle line structure.
Patented opening bags structure
The servo controlled opening bags structure can adapt to different sorts of packaging dimensions,by adjusting the data can achieve a exchange of products.
The shortest rim charge
Under the stable angle line situation,this machine shorten the length of the film rim to only 10mm.
High products packaging dimensions adaption
adjusting the inserted pads and stickered pads,as well as 2mm thickness folded panty liner
Rolling films placing structure .one for working and another for preparation .it anc achieve the non-stop bonding materials,saves the film exchange time,raise the working efficiency.
Intelligent failure analysis
when the machine breaks and material abnormal operation happens,it gave out relatively failure warning tips