GM089NY adult diaper baby diaper packing and wrapping machine
|Packing Speed:||45 Bags/min||Bag Making:||Pre-made Bags|
|Packaging speed||Stable at 40bags/min,|
|Packaging method||Rolling film tape, making bags on line.|
|Packaging material||PE or complex film, single thickness was 50-100μm|
|Packaging dimension||L≤400mm ,W=200mm-400mm,H=90mm -200mm|
|Installation power||About 19KW|
|Power requirement||Three phase four wires system(A,B,C,PE),380V/50Hz|
|Air requirement||Input pressure: 0.6-0.8MPa, air consumptionâ‰¦200LPM|
Changing the format by changing the size compnent,it only takes 20 minutes,it improved the production efficiency.
The full servo driving
By adapting Mitsubishi and Yaskawa motion controlling PLC and general linear servo driving system,it ensured a highly accurate package and stability.
Intelligent failure analysis
When the machine breaks and materail abnormal operation happens,it gave out relatively failure warning tips.
Easy to change the size, and only need to change a small part of the parts and a simple adjustment parameters, within 45 minutes to complete the change.
Waste will be generated after seal cutting, and then through the suction pump to the waste containers.
The protective device is made of aluminum alloy bracket and a transparent organic glass plate, the thickness of the glass plate should be over 6mm.
The equipment manual specified safety precautions, in the dangerous device, the equipment of power transmission and air movement mechanism are labeled with obvious warning signs.
All of the machine parts should do the surface treatment, and transmission parts made of the special steel and quenching and tempering treatment.
The electrical system device in accordance with the relevant provisions of GB/T5226.1-2002.
Electric control cabinet door adopts rotary open, the wiring is neat and easy to maintain, the electric control cabinet equipped with an axial flow fan cooling system.
The configuration of pneumatic system is in line with the national standards.
Chemical nickel-plating was performed on all parts of the surface, contact with the products stainless steel materials using SUS304, and harmless to human body.