Full servo adult diaper baby diaper packing and wrapping machine
Packing Speed: | 45 Bags/min | Bag Making: | Pre-made Bags |
---|---|---|---|
Yield: | ≥98% | Weight: | 4200kg |
Driving Motor: | Full Servo | Cylinder: | CKN Or SMC |
Model | GM-089N |
Packaging speed | Stable at 40bags/min, |
Yield | ≥98% |
working efficiency | ≥92% |
Packaging method | Rolling film tape, making bags on line. |
Packaging material | PE or complex film, single thickness was 50-100μm |
Packaging dimension | L≤400mm ,W=200mm-400mm,H=90mm -200mm |
Three size | L4.7m×W3.3m×H2.7m |
DW | About 4200KG |
Installation power | About 19KW |
Power requirement | Three phase four wires system(A,B,C,PE),380V/50Hz |
Air requirement | Input pressure: 0.6-0.8MPa, air consumption≦200LPM |
Format changing
Changing the format by changing the size compnent,it only takes 20 minutes,it improved the production efficiency.
The full servo driving
By adapting Mitsubishi and Yaskawa motion controlling PLC and general linear servo driving system,it ensured a highly accurate package and stability.
Intelligent failure analysis
When the machine breaks and materail abnormal operation happens,it gave out relatively failure warning tips.
The electrical system device in accordance with the relevant provisions of GB/T5226.1-2002.
Electric control cabinet door adopts rotary open, the wiring is neat and easy to maintain, the electric control cabinet equipped with an axial flow fan cooling system.
The configuration of pneumatic system is in line with the national standards.
Chemical nickel-plating was performed on all parts of the surface, contact with the products stainless steel materials using SUS304, and harmless to human body.
All of the machine parts should do the surface treatment, and transmission parts made of the special steel and quenching and tempering treatment.
The Base with the tube that wall thickness is 6mm, braced frame with solid rectangular steel that thickness is 5mm, the main panel using steel plate that thickness is 15mm.
Angle: angle overlap error ≤6mm (the two layer after sealing angle deviation ≤6mm)
sealing line symmetry: sealing symmetric allowable deviation of≤6mm (measure the range of sealing ends with color version of the line spacing)
The quality of sealing: firmly sealed, that should not appear crushed or seal is not solid.
The quality of the inside product: the inside product should not appear damage, and exact quantity. ( Non packaging machine factor)
Easy to change the size, and only need to change a small part of the parts and a simple adjustment parameters, within 45 minutes to complete the change.